Showing 1093–1104 of 1138 resultsSorted by latest

Show sidebar
Show 12 24 36

New Original KEYENCE SR-1000 Autofocus 1D and 2D Code Reader

Model SR-1000
Type Standard type
Receiver Sensor CMOS Image Sensor
Number of pixels 1280 × 1024 pixels
Focus Autofocus
Light emitter Light source High intensity red LED
Pointer light source High intensity green LED
Read more

New Original KEYENCE GP-M100T Heavy Duty Type Digital Pressure Sensor

Model GP-M100T
Rated pressure 0 to +1450 PSI
(0 to +10 MPa)
Possible display range –145.0 to +1595.4 PSI
(–1.00 to +11.00 MPa)
Allowable pressure 4351 PSI (30 MPa)
Zero-cut pressure value ±0.5% of F.S.
Burst pressure 14504 PSI (100 MPa)
Display resolution 1.5 PSI (0.01 MPa)
Fluid type Liquid that will not corrode the fluid contact part
Read more

New Original KEYENCE AP-V41AW Wire-saving AI Digital Pressure Sensor

Model AP-V41AW
Type Amplifier Unit, NPN
Applicable sensor head AP-41M, AP-41, AP-43, AP-44
Set and display range -15 to +110 % of F.S.
Display 4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18″), AI indicator (green), Display cycle: 10 times/s
Operation indicator Red LED x 2 (corresponding to control output 1 and 2)
Repeatability ±0.2 % of F.S.
Display resolution AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg
AP-43: Standard mode 0.01 kgf/cm2, High-resolution/Focus mode 0.02 Psi
Read more

New Original KEYENCE AP-C33K Ultra-compact Digital Pressure Sensor

Model AP-C33K
Type Positive pressure, NPN
Rated pressure 0 to 145.0 Psi
Fluid type Air or non-corrosive gases
Type of pressure Gauge pressure
Display 3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43″ (11 mm)) Display cycle: 10 times/s
Operation indicator Red LED x 2 (corresponding to control output 1 and 2)
Display resolution Normal mode: 0.2 Psi, Focus mode: 0.02 Psi
Power consumption Normal 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less
Read more

New Original KEYENCE FD-MZ100ATKP Non-Wetted Electrode Electromagnetic Flow Sensor

Model FD-MZ100ATKP
Type Vertical
Shape Built-in amplifier
Rated flow range 1.4 – 26.0 G/min (5.0 – 100 L/min)
Possible display range 1.4 – 52.8 G/min (5.0 – 200 L/min)*2
Possible ranges to set 0 – 52.8 G/min (0 – 200 L/min)
Connection port NPT1 (25 A)
Detectable fluids Water or non-corrosive liquid
Conductivity of detection fluids 5 µS/cm or higher
Read more

New Original KEYENCE FD-Q20C Clamp-on Flow Sensor

Model FD-Q20C
Supported pipe diameter 1/2″ (15 A), ø18 to ø23 (mm)
3/4″ (20 A), ø23 to ø28 (mm)
Supported pipe materials Metal pipe/Resin pipe*1
Supported fluids Various liquid [i.e. water (including DI), oils, chemicals, etc.]
Supported fluid temperature 0 to 85°C 32 to 185°F (No freezing on the pipe surface)
Maximum rated flow 1/2″ (15 A): 60 L/min, 15.9 G/min
3/4″ (20 A): 100 L/min, 26.4 G/min
Zero cut flow rate 2.5 L/min (Default)
Display method Status indicator, output indicator, dual row display with 4-digit, 7 segment LED, stability level indicator
Read more

New Original KEYENCE GA-245 Shock Sensor

Model GA-245
Type AC adj-dial
Applicable sensor head GH-313A, GH-513/613
Sensitivity adjustment 10-turn potentiometer dial
Response frequency 40 Hz to 8 kHz (-3dB)
Minimum detectable acceleration 0.98 m/s2 (GH-313A)
Indicator lamp Power indicator, 4 vibration level indicators
Output Control output Solid-state NPN: 100 mA 40 V max.*1
Relay SPDT, 250 VAC, 2A (resistive load)
Analog 0 to 20 VAC (P-P), 0 to 10 VDC (switch-selectable)
Output delay time Solid-state: 1 ms, Relay: 10 ms
Read more

New Original KEYENCE EX-V02 High-speed High-Accuracy Digital Displacement Inductive Sensor

Model EX-V02
Type Amplifier Unit NPN
Shape M10 x 18 mm 0.71″ Threaded
Measuring range 0 to 2 mm 0.08″
Display range -19,999 to +19,999
Linearity ±0.3% of F.S.
Resolution (No. of averaging
measurements: 64)		 0.4 μm
Sampling rate 40,000 samplings max./sec.
Read more

New Original KEYENCE FW-H07 High Power Digital Ultrasonic Sensor

Model FW-H07
Type Standard type
Detecting area 150 to 700 mm 5.9″ to 27.6″
Response speed 300 ms
Temperature characteristics 0.25% of F.S./°C
Indicator lamp Operation indicator (orange) x1 (Turns on when the power is turned on.)
Dimensions M18 x P1, Length= 63.5 mm 2.50″
Read more

New Original KEYENCE IB-30 Thrubeam Type Laser Detection Sensor

Model IB-30
Light source Wavelength 660 nm (Visible light semiconductor laser)
Laser Class Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)
Installation distance 0 to 300 mm 11.81″
Measurement range 30 mm 1.18″
Sampling cycle 12,500 times/sec. (80 µs)
Minimum detection target ø0.2 mm ø0.01″
Repeatability 10 µm 0.39 Mil
Temperature characteristics ±0.1 % of F.S./°C (±30 µm 1.18 Mil)
Operating indicators Laser emission warning indicator: green LED
Read more

New Original KEYENCE IG-028 Multi-Purpose CCD Laser Micrometer

Model IG-028
Operation principle CCD method
Light source Wavelength 660 nm (Visible light semiconductor laser)
FDA Class 1
IEC/JIS Class 1
Mounting distance 0 to 1500 mm 59.06″
Measurement range 28 mm 1.10″
Sampling cycle 980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable object High sensitivity mode ø0.1 mm ø0.003″ (Setting distance: 100 mm 3.94″)
Standard mode ø0.2 mm ø0.007″ (Setting distance: 50 mm 1.97″ or less),
ø0.5 mm ø0.02″ (Setting distance: 500 mm 19.68″)*2
Read more

New Original KEYENCE IL-1000 CMOS Multi-Function Analog Laser Sensor

Model IL-1000
Type DIN-rail mount
Main unit/Expansion unit Main unit
Head compatibility Compatible
Display Minimum
displayable unit		 IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm
Display range IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable),
IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable),
IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)
Display rate Approx. 10 times/sec.
Analog voltage output ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω
Analog current output 4 to 20 mA Maximum load resistance of 350 Ω
Read more