Products
New Original KEYENCE GL-R32H Light Curtain Safety Sensor
| Model | GL-R32H | |||
| Detection capability | ø0.98″ ø25 mm | |||
| Total length | 25.20″ 640mm | |||
| No. of beam | 32 | |||
| Detection height | 24.41″ 620mm | |||
| Protection height | 26.18″ 665mm | |||
| Beam axis spacing/Lens diameter | 20 mm / ø5 0.79″ / ø0.20″ | |||
| Detecting distance | 0.66 to 49.21′ 0.2 to 15 m | |||
| Effective aperture angle | Max. ±2.5° (When operating distance is 9.84′ 3 m or more) | |||
| Light source | Infrared LED (870 nm) | |||
New Original KEYENCE GL-R55F Light Curtain Safety Sensor
| Model | GL-R55F | |||
| Detection capability | ø0.55″ ø14 mm | |||
| Total length | 22.05″ 560mm | |||
| No. of beam | 55 | |||
| Detection height | 21.26″ 540mm | |||
| Protection height | 22.20″ 564mm | |||
| Beam axis spacing/Lens diameter | 10 mm 0.39″ / ø4 ø0.16″ | |||
| Detecting distance | 0.66 to 32.81′ 0.2 to 10 m | |||
| Effective aperture angle | Max. ±2.5° (When operating distance is 9.84′ 3 m or more) | |||
| Light source | Infrared LED (870 nm) | |||
New Original KEYENCE BL-1301 Laser Barcode Reader
| Model | BL-1301 | |||
| Type | Standard type | |||
| Type | Reading direction | Front | ||
| Scanning method | Raster | |||
| Laser | Light source | Visible semiconductor laser (wavelength: 660 nm) | ||
| Control output | 85 µW | |||
| Pulse duration | 112 µs | |||
| Laser class | Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10) | |||
| Reading | Supported codes | CODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBar | ||
| Number of readable digits | 74 digits (148 digits for CODE128 with start character C) | |||
| Readable bar width | 0.125 mm0.005″ | |||
| Reading distance | 65 to 500 mm 2.56″ to 19.69″ (narrow bar width 1.0 mm 0.04″) | |||
| Focal point | 120 mm 4.72″ | |||
| Largest readable label width | 339 mm 13.35″ (distance: 350 mm 13.78″, narrow bar width: 1.0 mm 0.04″) | |||
| PCS | 0.4 or more | |||
| Scanning rate | 500 to 1,300 scans/sec. (in units of 100 scans) | |||
New Original KEYENCE N-R2 Dedicated Communication Unit
| Model | N-R2 | |||
| Interface | RS-232C | |||
| Code reader power supply | 5 VDC ±5% (650 mA) | |||
| Terminal block | Input | Number of inputs | 2 inputs (IN1 and IN2) | |
| Input type | Bidirectional voltage input | |||
| Maximum rating | 26.4 VDC | |||
| Minimum ON voltage | 15 VDC | |||
| Maximum OFF current | 1 mA | |||
| Output | Number of outputs | 4 outputs (OUT1 to 4) | ||
| Output type | Photo MOS relay output | |||
| Rated load | 30 VDC, 100 mA | |||
| Leakage current when OFF | 0.1 mA or less | |||
| Residual voltage when ON | 1 V or less | |||
New Original KEYENCE HR-100B Barcode Reader Scanner
| Model | HR-100B | |||
| Type | Standard | |||
| Interface | Wireless | |||
| Light source | Red LED | |||
| Wireless | Standard | Bluetooth version 2.1 | ||
| Reading specifications |
Supported symbol |
2D | QR, MicroQR, DataMatrix (ECC200) , PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C) , MaxiCode, AztecCode | |
| Barcode | CODE39, ITF, 2of5 (Industrial 2of5) , NW-7 (Codabar) , CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, MSI, Postal, CODE11, 2of5 | |||
| Minimum resolution |
2D | 0.169 mm 0.007″ | ||
| Barcode | 0.127 mm 0.005″ | |||
| Reading distance |
2D | 15 to 180 mm 0.59″ to 7.09″ (Cell size = 0.254 mm 0.01″) | ||
| Barcode | 25 to 115 mm 0.98″ to 4.53″ (Narrow bar width = 0.127 mm 0.005″) | |||
New Original KEYENCE SR-1000 Autofocus 1D and 2D Code Reader
| Model | SR-1000 | |||
| Type | Standard type | |||
| Receiver | Sensor | CMOS Image Sensor | ||
| Number of pixels | 1280 × 1024 pixels | |||
| Focus | Autofocus | |||
| Light emitter | Light source | High intensity red LED | ||
| Pointer light source | High intensity green LED | |||
New Original KEYENCE GP-M100T Heavy Duty Type Digital Pressure Sensor
| Model | GP-M100T | |||
| Rated pressure | 0 to +1450 PSI (0 to +10 MPa) |
|||
| Possible display range | –145.0 to +1595.4 PSI (–1.00 to +11.00 MPa) |
|||
| Allowable pressure | 4351 PSI (30 MPa) | |||
| Zero-cut pressure value | ±0.5% of F.S. | |||
| Burst pressure | 14504 PSI (100 MPa) | |||
| Display resolution | 1.5 PSI (0.01 MPa) | |||
| Fluid type | Liquid that will not corrode the fluid contact part | |||
New Original KEYENCE AP-V41AW Wire-saving AI Digital Pressure Sensor
| Model | AP-V41AW | |||
| Type | Amplifier Unit, NPN | |||
| Applicable sensor head | AP-41M, AP-41, AP-43, AP-44 | |||
| Set and display range | -15 to +110 % of F.S. | |||
| Display | 4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18″), AI indicator (green), Display cycle: 10 times/s | |||
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |||
| Repeatability | ±0.2 % of F.S. | |||
| Display resolution | AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm2, High-resolution/Focus mode 0.02 Psi |
|||
New Original KEYENCE AP-C33K Ultra-compact Digital Pressure Sensor
| Model | AP-C33K | |||
| Type | Positive pressure, NPN | |||
| Rated pressure | 0 to 145.0 Psi | |||
| Fluid type | Air or non-corrosive gases | |||
| Type of pressure | Gauge pressure | |||
| Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43″ (11 mm)) Display cycle: 10 times/s | |||
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |||
| Display resolution | Normal mode: 0.2 Psi, Focus mode: 0.02 Psi | |||
| Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less | ||
New Original KEYENCE FD-MZ100ATKP Non-Wetted Electrode Electromagnetic Flow Sensor
| Model | FD-MZ100ATKP | |||
| Type | Vertical | |||
| Shape | Built-in amplifier | |||
| Rated flow range | 1.4 – 26.0 G/min (5.0 – 100 L/min) | |||
| Possible display range | 1.4 – 52.8 G/min (5.0 – 200 L/min)*2 | |||
| Possible ranges to set | 0 – 52.8 G/min (0 – 200 L/min) | |||
| Connection port | NPT1 (25 A) | |||
| Detectable fluids | Water or non-corrosive liquid | |||
| Conductivity of detection fluids | 5 µS/cm or higher | |||
New Original KEYENCE FD-Q20C Clamp-on Flow Sensor
| Model | FD-Q20C | |||
| Supported pipe diameter | 1/2″ (15 A), ø18 to ø23 (mm) 3/4″ (20 A), ø23 to ø28 (mm) |
|||
| Supported pipe materials | Metal pipe/Resin pipe*1 | |||
| Supported fluids | Various liquid [i.e. water (including DI), oils, chemicals, etc.] | |||
| Supported fluid temperature | 0 to 85°C 32 to 185°F (No freezing on the pipe surface) | |||
| Maximum rated flow | 1/2″ (15 A): 60 L/min, 15.9 G/min 3/4″ (20 A): 100 L/min, 26.4 G/min |
|||
| Zero cut flow rate | 2.5 L/min (Default) | |||
| Display method | Status indicator, output indicator, dual row display with 4-digit, 7 segment LED, stability level indicator | |||
New Original KEYENCE GA-245 Shock Sensor
| Model | GA-245 | |||
| Type | AC adj-dial | |||
| Applicable sensor head | GH-313A, GH-513/613 | |||
| Sensitivity adjustment | 10-turn potentiometer dial | |||
| Response frequency | 40 Hz to 8 kHz (-3dB) | |||
| Minimum detectable acceleration | 0.98 m/s2 (GH-313A) | |||
| Indicator lamp | Power indicator, 4 vibration level indicators | |||
| Output | Control output | Solid-state | NPN: 100 mA 40 V max.*1 | |
| Relay | SPDT, 250 VAC, 2A (resistive load) | |||
| Analog | 0 to 20 VAC (P-P), 0 to 10 VDC (switch-selectable) | |||
| Output delay time | Solid-state: 1 ms, Relay: 10 ms | |||
