Model				FD-MZ100ATKP
Type				Vertical
Shape				Built-in amplifier
Rated flow range				1.4 – 26.0 G/min (5.0 – 100 L/min)
Possible display range				1.4 – 52.8 G/min (5.0 – 200 L/min)^*2
Possible ranges to set				0 – 52.8 G/min (0 – 200 L/min)
Connection port				NPT1 (25 A)
Detectable fluids				Water or non-corrosive liquid
Conductivity of detection fluids				5 µS/cm or higher

Model				FD-Q20C
Supported pipe diameter				1/2″ (15 A), ø18 to ø23 (mm) 3/4″ (20 A), ø23 to ø28 (mm)
Supported pipe materials				Metal pipe/Resin pipe^*1
Supported fluids				Various liquid [i.e. water (including DI), oils, chemicals, etc.]
Supported fluid temperature				0 to 85°C 32 to 185°F (No freezing on the pipe surface)
Maximum rated flow				1/2″ (15 A): 60 L/min, 15.9 G/min 3/4″ (20 A): 100 L/min, 26.4 G/min
Zero cut flow rate				2.5 L/min (Default)
Display method				Status indicator, output indicator, dual row display with 4-digit, 7 segment LED, stability level indicator

Model			GA-245
Type			AC adj-dial
Applicable sensor head			GH-313A, GH-513/613
Sensitivity adjustment			10-turn potentiometer dial
Response frequency			40 Hz to 8 kHz (-3dB)
Minimum detectable acceleration			0.98 m/s² (GH-313A)
Indicator lamp			Power indicator, 4 vibration level indicators
Output	Control output	Solid-state	NPN: 100 mA 40 V max.^*1
		Relay	SPDT, 250 VAC, 2A (resistive load)
		Analog	0 to 20 VAC (P-P), 0 to 10 VDC (switch-selectable)
	Output delay time		Solid-state: 1 ms, Relay: 10 ms

Model				EX-V02
Type				Amplifier Unit NPN
Shape				M10 x 18 mm 0.71″ Threaded
Measuring range				0 to 2 mm 0.08″
Display range				-19,999 to +19,999
Linearity				±0.3% of F.S.
Resolution (No. of averaging measurements: 64)				0.4 μm
Sampling rate				40,000 samplings max./sec.

Productos