New Original SMC MSQB30R Rotary Actuator Table Cylinder
"*" indicates required fields
Detailed Product Introduction: New Original SMC MGPM25TF-100AZ Compact Guide Rod Cylinder
1. Product Overview
MGPM25TF-100AZ is an original dual-guide rod compact pneumatic cylinder from SMC MGPM series, also defined as three-rod guided cylinder. This integrated actuator combines cylinder body, two parallel precision guide rods and sliding bearing assembly into one unit, which fundamentally restricts piston rod rotation and effectively bears lateral loads and moment loads. Model coding definition: 25 refers to cylinder bore diameter of 25 mm; 100 stands for effective piston stroke length of 100 mm; TF represents high-precision ball bushing bearing structure; suffix AZ means double acting type with air cushions on both ends and magnetic piston installed for stroke sensor mounting. Driven by filtered compressed air, it executes stable linear reciprocating motions. Widely used for clamping, lifting, positioning, material pushing, feeding and pressing actions on automated assembly lines, electronic processing equipment, packaging machinery, automated jigs and logistics conveying systems. Its built-in guide structure eliminates the need for additional external guide accessories, saving mechanical design space and simplifying equipment assembly layout.
2. Main Functions
- Double-acting bidirectional linear driving: Compressed air is alternately fed into front and rear air chambers to drive piston rod extension and retraction reciprocally, providing steady push and pull output force.
- Anti-rotation positioning function: Twin parallel guide rods lock the rotational degree of freedom of the piston rod completely, ensuring consistent output direction without twisting deviation.
- Lateral load bearing capacity: The integrated guide rod assembly can withstand horizontal lateral force and tipping moment during operation, applicable to working conditions with offset loads.
- Dual-end air buffer buffering: Adjustable air cushions at both stroke terminals slow down piston impact, reduce operating noise and avoid rigid collision damage to internal components.
- Magnetic sensing compatibility: Permanent magnet embedded inside the piston allows installation of SMC magnetic auto switches on cylinder side grooves to achieve stroke limit signal feedback for automatic control systems.
- Multi-directional fixed installation: Standard bottom mounting holes and front flange holes support horizontal, vertical and inverted installation to meet diverse equipment layout requirements.
3. Technical Specifications
| Specification Item | Parameter Value |
|---|---|
| Full Model Number | MGPM25TF-100AZ |
| Product Series | MGPM Compact Guide Rod Cylinder |
| Operation Mode | Double Acting |
| Bore Size | 25 mm |
| Rated Stroke | 100 mm |
| Guide Bearing Type | Precision Ball Bushing |
| Buffer Method | Adjustable Air Cushion on Both Ends |
| Piston Structure | With Built-in Permanent Magnet |
| Working Medium | Filtered Compressed Air |
| Operating Pressure Range | 0.1 ~ 0.8 MPa |
| Proof Pressure | 1.5 MPa |
| Operating Temperature Range | 0 °C ~ 60 °C (Condensation prohibited inside cylinder) |
| Cylinder Body Material | High-strength Extruded Aluminum Alloy |
| Guide Rod Material | Hard Chrome Plated Alloy Steel |
| Sealing Material | Nitrile Rubber (NBR) |
| Air Port Thread | Rc1/8 |
| Lubrication | Non-lubricated operation available |
4. Overall Dimensions & Net Weight
External Dimensions (Unit: mm)
- Retracted total length: 165
- Fully extended total length: 265
- Cylinder body width: 76
- Cylinder body height: 32
- Guide rod diameter: 12
- Piston rod diameter: 12
- Bottom mounting hole pitch: 58 mm (lengthwise)
Net Weight
Single cylinder net weight: 710 grams
5. Core Technical Features
- High precision ball bushing guidance: Low sliding friction ensures ultra-smooth movement, high positioning accuracy and excellent repeatability for precision automation processes.
- High rigidity integrated structure: Aluminum alloy body plus dual solid guide rods greatly enhance structural stability, resistant to vibration and impact in continuous production environments.
- Adjustable air cushion system: Buffer intensity can be finely tuned via small screws at both ends to adapt different load weights and movement speeds.
- Anti-deflection design: Eliminates rod wobble even under partial lateral loads, greatly prolonging service life of sealing rings.
- Convenient sensor installation: Long sliding grooves on two sides of the cylinder enable free sliding and locking of magnetic switches to set arbitrary stroke trigger positions.
- Compact space-saving layout: Guide rods and cylinder are assembled integrally, much smaller overall size than combinations of ordinary cylinder plus external guide assemblies.
- Excellent durability: Wear-resistant chrome-plated guide rods and dust-proof structure prevent dust intrusion, suitable for long-cycle continuous industrial operation.
6. Ten SMC Similar Functional Guide Rod Cylinders
All below items are SMC original guided pneumatic cylinders with anti-rotation and lateral load bearing capability, differing in bore, stroke, bearing type and accessory configuration:
- MGPM25TF-50AZ: 25mm bore, 50mm stroke ball bushing guided compact cylinder with bilateral air cushions
- MGPM25TF-75AZ: 25mm bore, 75mm stroke three-rod guided cylinder for medium stroke linear motion
- MGPM25-100AZ: Plain sliding bearing version of MGPM25 series, cost-effective for low-speed working conditions
- MGPM20TF-100AZ: 20mm bore small-size guide rod cylinder for light load precision equipment
- MGPM32TF-100AZ: 32mm bore large thrust guided cylinder for heavy load pushing and clamping tasks
- MGPM25TF-100A: Without air cushion structure, applied to high-speed short cycle reciprocating movement
- MGPWM25TF-100AZ: Double piston rod through-type guided cylinder for bidirectional workpiece positioning
- MGPM25TF-100AZ-XC8: Stroke adjustable type cylinder with front stroke adjustment mechanism
- MGPM25TF-100AZ-M9BW: Pre-assembled magnetic switch complete set for direct plug-and-play installation
- MGPM25TF-100AZ-S: Surface corrosion treated version for humid and slightly corrosive workshop environments
用纯英文详细介绍，包括产品概述，主要功能，技术特点，产品尺寸，重量等内容，部分内容可以采用表格形式，不能有引用超链接 ，并例举 10 个同品牌近似功能的产品：New Original SMC MSQB30R Rotary Actuator Table Cylinder
搜索 2 个关键词，参考 9 篇资料
Detailed Product Introduction: New Original SMC MSQB30R Rotary Actuator Table Cylinder
1. Product Overview
The MSQB30R is an original rack-and-pinion pneumatic rotary table actuator from SMC classic MSQ series, widely adopted for angular rotary positioning in automated industrial equipment. Model definition: MSQB stands for basic standard rotary table type; digit 30 represents frame size 30 for medium torque output; suffix R denotes the version equipped with built-in internal shock absorbers for terminal buffering. Driven by compressed air, the internal rack and pinion structure converts linear piston motion into precise rotary movement of the upper mounting table, with adjustable rotation angle ranging from 0° to 190°. A hollow rotary center, precision rolling bearings and multiple workpiece mounting holes are integrated on the turntable surface. It is extensively applied for workpiece indexing, turning, flipping and angle positioning tasks in electronic assembly lines, packaging machinery, automated jigs, printing equipment, testing fixtures and logistics sorting systems. Compared with ordinary swing cylinders, this unit delivers higher rotary accuracy, stronger axial and radial load capacity and better impact resistance.
2. Main Functions
- Bidirectional precision rotary indexing: Alternate air intake into two air chambers drives the turntable to rotate clockwise and counterclockwise freely; users can set any stop angle between 0° and 190° via external adjustment bolts.
- Built-in shock absorption buffering: Internal hydraulic shock absorbers installed at both rotation terminals absorb kinetic energy at stroke ends, reduce collision vibration and operating noise effectively.
- Multi-directional workpiece mounting: Standard threaded holes, positioning pin holes and center hollow bore on the turntable facilitate secure fixture installation, wiring and pipeline arrangement through the hollow shaft.
- Magnetic stroke signal feedback: Permanent magnet embedded inside the piston body supports installation of SMC magnetic auto switches to output limit signals for PLC automatic control loop.
- Heavy load bearing capability: Large-diameter rolling bearings bear axial pressure, radial force and overturning moment stably during continuous rotary operation.
- Flexible angle fine-tuning: External adjusting screws on both sides realize tiny rotation angle calibration to meet strict positioning tolerance requirements.
3. Technical Specifications
| Specification Item | Specific Parameter |
|---|---|
| Complete Model | MSQB30R |
| Product Structure | Rack & Pinion Rotary Table Actuator |
| Rotation Angle Range | 0° ~ 190° (Adjustable) |
| Operation Mode | Double Acting |
| Frame Size | 30 |
| Cushion Mode | Built-in Internal Shock Absorbers |
| Working Medium | Filtered Dry Compressed Air |
| Rated Operating Pressure | 0.1 ~ 0.6 MPa |
| Proof Pressure | 1.0 MPa |
| Ambient & Air Temperature | 0 °C ~ 60 °C (No internal condensation permitted) |
| Air Port Thread | Rc 1/8 inch |
| Table Tolerance Grade | H9/h9 (Basic Standard Precision) |
| Main Body Material | Hard Anodized Aluminum Alloy |
| Pinion & Rack Material | Alloy Steel with Wear-resistant Treatment |
| Sealing Material | Nitrile Rubber (NBR) |
| Hollow Shaft Structure | Available for wiring/piping penetration |
| Compliance Standard | RoHS, CE Industrial Certification |
4. Overall External Dimensions & Net Weight
External Dimensions (Unit: Millimeter)
- Total overall height: 76
- Overall body length: 152
- Overall body width: 75.4
- Turntable outer diameter: 72
- Central hollow bore diameter: 22
- Adjustment bolt protruding length: 16
- Mounting base hole pitch: 62
Net Weight
Single unit net weight: 585 grams
5. Core Technical Features
- High-precision rack-pinion transmission: Precision gear meshing ensures low backlash, excellent rotary repeatability and stable angle positioning without drift after long-term cyclic operation.
- Enhanced load-bearing bearing system: Double-row rolling bearings offer 3–4 times higher axial load capacity than traditional compact swing cylinders, suitable for offset heavy workpieces.
- Integrated internal shock absorber design: Built-in buffers greatly reduce terminal impact force, prolonging service life of internal gears and sealing components.
- Hollow center turntable layout: Central through hole allows cables and air tubes to pass through the rotating center, optimizing internal equipment layout neatly.
- Complete anti-leakage sealing system: Multi-lip sealing rings minimize air leakage, maintain steady torque output under fluctuating air pressure conditions.
- Compact integrated structure: Low-profile turntable design saves vertical installation space inside automated machinery.
- Convenient maintenance & adjustment: External screws support quick angle correction and buffer force tuning without disassembly of the whole cylinder body.
6. Ten SMC Similar Functional Rotary Table Actuators
All listed products are SMC original rack-and-pinion rotary tables for angular positioning and rotary indexing, differing in frame size, buffering mode, precision grade and structural accessories:
- MSQB30A: Basic version with rubber bump stop instead of internal shock absorbers, cost-effective for low-speed light-load scenarios
- MSQB20R: Size 20 small torque rotary table with built-in shock absorbers for miniature precision automation equipment
- MSQB50R: Size 50 large torque heavy-duty rotary table for big workpiece flipping and indexing tasks
- MSQA30R: High-precision tolerance version (H8/h8 table fit) for precision testing and optical processing equipment
- MSQB10R: Ultra-compact size 10 micro rotary actuator for tiny electronic component sorting
- MSQB70R: Extra large frame rotary table for heavy-load logistics and packaging production lines
- MSQB30R-M9BW: Complete set pre-assembled with two magnetic auto switches for direct automatic control application
- MSQB30R-X7: Cleanroom low-dust special version for semiconductor and medical industry workshops
- MSQB100R: Super large torque rotary table for industrial heavy fixture rotary positioning
- MSQB30R-90: Fixed 90-degree limited rotation customized version for single-angle reciprocating swing work
WHO WE ARE
About us
Located in Kunshan, China, Atifts Technology Co., Ltd. is a well-known enterprise specializing in electronic components distribution. We specialize in the sales of global brands of industrial automation components, with a wealth of experience in foreign product agents, and many of the world's leading manufacturers such as Keens, Schneider, SMC, ABB, Siemens, and other world-renowned manufacturers to establish a long-term and stable relations of cooperation.
Atifts Technology Co., Ltd. @ 2024
Over the years, we have always adhered to the "pioneering, pragmatic, standardized, innovative" management philosophy, and constantly promote the close integration of products and market demand. We firmly believe that only by constantly exploring new market areas, doing a good job in every detail, standardizing business processes, and continuously innovating products and services can we ensure that our products are more adaptable to market changes and meet the diversified needs of our customers.
Since the founding of the company, we have always adhered to the core concept of "survival by quality", and are committed to providing customers with high-quality electronic components. At the same time, we take specialized R & D manufacturing as the goal, market-oriented development strategy to ensure that our products are always in the forefront of the industry.
With excellent product quality, professional technical service and good market reputation, Kunshan Autofits Technology Co.,Ltd. has won the trust and support of our customers. We look forward to working with more partners hand in hand, to achieve long-term win-win relationship, and jointly promote the prosperity of the electronic components industry.
Where is your company located?
We are located next to Shanghai, the largest city in China, and Kunshan, the first economic county in China. With convenient transportation and developed logistics, it provides a good geographical advantage for our electronic components sales business.
What types of electronic components does your company mainly sell?
We are committed to providing many types and brands of electronic components, including but not limited to Sensors, Switches & Relays, Connectors, Circuit Protectio, Power Supplier & Cable, etc. We have established relationships with many well-known electronic component manufacturers. We have established long-term and stable relationships with many well-known electronic component manufacturers to ensure that the products we sell are of reliable quality and reasonable price.
What are the prices of your products?
Our product prices vary according to market conditions and product models. We are committed to providing high quality electronic components at fair and reasonable prices, and offer our customers a variety of incentives and flexible purchasing methods.
How to purchase your electronic components?
You can contact our customer service staff directly by phone, whatsapp, email, our official website. We support a variety of payment methods, and provide you with fast and safe logistics and distribution services.
How do you guarantee the quality of your products?
We attach great importance to product quality, all the electronic components we sell come from regular channels and undergo strict quality testing. We promise to provide customers with high-quality electronic components, and provide perfect after-sales service to ensure that customers have no worries in the process of use.
If I am not satisfied with the electronic components I purchased, can I return them?
We provide perfect after-sales service, if you are not satisfied with the purchased electronic components, you can return or exchange them within the specified time. Please refer to our official website or consult our customer service staff for the specific return policy and process.
Can your company provide technical support and solutions?
We have a professional technical team that can provide technical support and solutions for our customers. Whether you encounter any problems in choosing or using the products, we will be happy to answer your questions and provide professional technical support.
How to contact your customer service?
You can contact our customer service personnel through the online customer service system on our official website, telephone, e-mail or social media platforms. Our customer service staff will provide you with professional services and answer any questions you may have.
Does your company often organize promotional activities?
In order to give back to our customers, we will organize various promotions from time to time, including discounts, full reductions, giveaways and so on. Please keep an eye on our official website or social media platforms to stay up-to-date with the latest promotions.
