New Original ifm PM1602 Hygienic Pressure Transmitter
"*" señala los campos obligatorios
New Original ifm PM1602 Hygienic Pressure Transmitter
Product Overview
This ifm PM1602 hygienic flush pressure transmitter belongs to the PM sanitary sensor series and adopts a stainless steel fully hygienic structure with flush ceramic measuring cell for food, beverage and pharmaceutical process pipelines and tanks. It has a measuring range of -1 to 100 bar and G1 external thread process connection, and it supports CIP and SIP high temperature cleaning cycles common in hygienic production lines. It integrates analog signal output and IO-Link digital communication, and it is widely used for continuous pressure monitoring of liquid, viscous media and media containing fine particles in sanitary automation systems.
Main Functions
This transmitter converts process pressure into standard 4 to 20 mA analog signal and transmits measurement data to PLC or process controllers, while the IO-Link interface enables parameter setting, remote zero calibration and diagnostic information reading. The flush diaphragm design prevents material accumulation and dead zones at the measuring point to meet hygienic requirements. It supports zero point adjustment via local teach button or IO-Link command, and it can continuously output real time pressure values for closed loop pressure regulation, tank level calculation and pipeline fault monitoring in sanitary production processes. It also provides built in reverse polarity protection to avoid damage from wiring mistakes.
Technical Characteristics
This sensor works on 18 to 30 volt DC supply and complies with DIN EN 61298-2 standard, with total accuracy better than ±0.5 %FS and repeatability within ±0.1 %FS. Its medium temperature ranges from -25 degrees Celsius to 125 degrees Celsius and can withstand short term 150 degrees Celsius for one hour during sterilization. The wetted parts are made of 316L stainless steel and 99.9% alumina ceramic with PTFE sealing, and the whole unit reaches IP69K high protection grade for high pressure washdown cleaning. The overload pressure is 200 bar and burst pressure is 650 bar, and it maintains stable performance after up to 100 million pressure cycles.
Physical Specification
| Item | Parameter |
|---|---|
| Model | PM1602 |
| Order number | PM1602 |
| Measuring range | -1 … 100 bar |
| Process connection | G1 external thread, sealing cone |
| Wetted material | 1.4435 (316L) stainless steel, 99.9% ceramic |
| Output | 4…20 mA + IO-Link |
| Protection class | IP69K |
| Dimension | Ø30.2 mm × L122 mm |
| Weight | 330 g |
Ten Similar ifm Products with Approximate Function
- ifm PM1603 hygienic pressure transmitter
- ifm PM1606 hygienic pressure transmitter
- ifm PM1703 hygienic pressure transmitter
- ifm PM1714 hygienic pressure transmitter
- ifm PM1543 hygienic pressure transmitter
- ifm PM1103 hygienic pressure transmitter
- ifm PM1143 hygienic pressure transmitter
- ifm PI2794 hygienic pressure transmitter
- ifm PI2897 hygienic pressure transmitter
- ifm PM1604 hygienic pressure transmitter
Sobre nosotros
