New Original Siemens 6ES7 135-4GB01-0AB0 6ES7135-4GB01-0AB0 Analog Output Module
"*" indicates required fields
New Original Siemens 6ES7135-4GB01-0AB0 Analog Output Module
1. Product Overview
The Siemens 6ES7135-4GB01-0AB0 is a brand-new original analog output electronic module belonging to the SIMATIC ET 200S distributed I/O series. This 4-channel analog output module converts digital control signals sent by upper-level S7-300 and S7-400 PLCs into standardized continuous 0–20 mA / 4–20 mA analog current signals to drive field regulating equipment such as proportional valves, frequency converters, electric regulating valves and signal indicators. It works with IM151 series PROFIBUS DP interface modules and matched ET 200S terminal base units to build decentralized process control systems widely used in chemical production, water treatment, HVAC, packaging machinery and hydraulic control units. The module supports hot-swap maintenance without powering off the entire ET200S station, built-in full-channel fault diagnosis and independent signal filtering circuits. Its split structure separates the electronic core and wiring terminal base, so field signal cables do not need to be reconnected during module replacement, effectively reducing equipment maintenance downtime. All parameter configuration, signal calibration and fault diagnosis operations are uniformly realized through TIA Portal engineering software.
2. Main Functions
- 4-Channel Standard Current Analog Signal Output
Software selectable output ranges including 0–20 mA and 4–20 mA, compatible with most industrial current-type actuators and regulating transmitters on the market.
- High-Precision Digital-to-Analog Conversion
Adopts high-resolution DAC chips to ensure stable linear output signals, minimizing control deviation for closed-loop process adjustment.
- Independent Per-Channel Fault Diagnosis
Automatically detects wire breakage, short-circuit and overload faults on each output channel, and uploads fault alarm information to the PLC via PROFIBUS DP bus in real time.
- Adjustable Output Smoothing Filter
Digital smoothing function configurable through TIA Portal to filter sudden signal fluctuations and avoid frequent jitter of on-site regulating valves.
- Separate Channel LED Status Indicators
Each analog output channel is equipped with an independent green LED to display normal operation or fault alarm status for quick on-site inspection.
- Hot-Swap Replacement Function
When matched with dedicated ET200S terminal modules, the electronic module can be disassembled and replaced while the ET200S station runs normally.
- Galvanic Isolation Between Bus and Field Circuits
Isolation structure separates the internal backplane bus circuit and field analog output loop to eliminate cross-channel interference and electromagnetic noise from inverters.
- PROFIBUS DP Isochronous Communication Compatibility
Supports isochronous bus transmission mode to meet high-synchronization closed-loop control requirements of continuous process production lines.
- Reverse Polarity and Short-Circuit Protection
Built-in multi-layer protection circuits to prevent module burnout caused by reversed wiring or short-circuit of field actuator signal lines.
- Flexible Modular System Expansion
Stackable layout with other ET 200S digital I/O, analog input, temperature measurement and safety modules to expand analog control points according to process demands.
3. Technical Characteristics
| Technical Parameter | Specification of 6ES7135-4GB01-0AB0 |
|---|---|
| Complete Model Code | 6ES7135-4GB01-0AB0 |
| Product Series | SIMATIC ET 200S Analog Output Module |
| Channel Configuration | 4 analog output channels |
| Selectable Output Signal Ranges | 0–20 mA, 4–20 mA |
| Conversion Resolution | 13 bits plus sign bit |
| Basic Measurement Error | ±0.5% of full scale under 25 °C environment |
| Maximum Load Resistance per Channel | 500 Ω |
| Adjustable Signal Smoothing Cycles | 1, 4, 8, 16 cycles configurable via software |
| Diagnostic Functions | Wire break detection, channel short-circuit, overload monitoring |
| Communication Bus | PROFIBUS DP (cooperates with IM151 interface modules) |
| Isochronous Mode Support | Yes |
| Isolation Withstand Voltage | 500 V DC between bus side and field output side |
| Backplane 3.3 V DC Bus Current Consumption | Max 15 mA |
| Typical Module Power Dissipation | 1.5 W |
| PLC Process Image Address Occupation | 4 words output address space |
| Visual Indicator | 4 independent channel green LED lights |
| Protection Class | IP20, only applicable for cabinet internal installation |
| Operating Ambient Temperature | 0 °C ~ +60 °C vertical installation |
| Storage & Transport Temperature | -40 °C ~ +70 °C |
| Industrial Compliance Certifications | CE, UL global industrial safety certifications |
| Matching Accessories | ET200S Type A or Type B terminal modules |
4. Product Dimensions & Weight
4.1 Overall Module Dimensions
| Dimension Item | Exact Measurement |
|---|---|
| Module Width | 15 mm |
| Module Height | 81 mm |
| Module Depth | 52 mm |
4.2 Weight Specifications
- Net weight of single electronic module (excluding terminal base): 0.047 kg
- Gross weight with original individual packaging carton: 0.070 kg
5. Core Structural & Design Advantages
- Ultra-slim 15 mm narrow housing: Saves abundant DIN rail installation space inside control cabinets, suitable for compact small machine control panels.
- Split electronic-terminal modular design: Field actuator signal cables are fixed on the terminal base; no need to disconnect all wiring during module replacement to reduce maintenance time.
- Single-channel independent fault isolation: Fault of one output channel will not interfere with the normal operation of other channels, avoiding full-process control loop shutdown.
- Strong anti-interference hardware layout: Multi-stage filtering and isolation circuits guarantee stable analog output signals in workshops equipped with servo drives and frequency converters.
- Low heat generation circuit design: Slight heat accumulation during long-term continuous operation without additional heat dissipation fans.
- Unified ET 200S platform compatibility: Freely combined with all ET 200S series I/O modules without extra conversion adapters.
- Vibration-resistant integrated casing: Adaptable to vibration-intensive production environments such as metal processing and packaging workshops.
6. List of 10 Similar Functional Siemens ET 200S Analog Output Modules
All listed products belong to ET 200S analog output modules for driving field regulating actuators, featuring split electronic-terminal structure and PROFIBUS DP communication; differences exist in channel quantity, signal types, intrinsic safety standards and precision grades:
- Siemens 6ES7135-4FB01-0AB0: 4-channel intrinsically safe analog output module for Zone 2 hazardous chemical workshops
- Siemens 6ES7135-4GB00-0AB0: Basic 4-channel 4–20 mA analog output module without complete channel diagnostic function
- Siemens 6ES7135-4LB02-0AB0: 8-channel high-density current analog output module for multi-point centralized process regulation
- Siemens 6ES7135-4EB00-0AB0: 4-channel voltage analog output module supporting 0–10 V DC output signals
- Siemens 6ES7135-4MB00-0AB0: 2-channel ultra-high precision analog output module with 16-bit DAC resolution
- Siemens 6ES7135-4SB00-0AB0: 4-channel fail-safe F-AO analog output module for PL e safety control loops
- Siemens 6ES7135-4GB01-0CB0: SIPLUS wide-temperature anti-corrosion analog output module for humid corrosive workshops
- Siemens 6ES7135-4PB00-0AB0: 4-channel universal analog output module supporting both voltage and current signal output
- Siemens 6ES7135-4NB00-0AB0: 4-channel fast response analog output module for high-speed closed-loop motion control
- Siemens 6ES7135-4JD00-0AB0: 4-channel low-load miniature analog output module for small laboratory automation equipment
WHO WE ARE
About us
Located in Kunshan, China, Atifts Technology Co., Ltd. is a well-known enterprise specializing in electronic components distribution. We specialize in the sales of global brands of industrial automation components, with a wealth of experience in foreign product agents, and many of the world's leading manufacturers such as Keens, Schneider, SMC, ABB, Siemens, and other world-renowned manufacturers to establish a long-term and stable relations of cooperation.
Atifts Technology Co., Ltd. @ 2024
Over the years, we have always adhered to the "pioneering, pragmatic, standardized, innovative" management philosophy, and constantly promote the close integration of products and market demand. We firmly believe that only by constantly exploring new market areas, doing a good job in every detail, standardizing business processes, and continuously innovating products and services can we ensure that our products are more adaptable to market changes and meet the diversified needs of our customers.
Since the founding of the company, we have always adhered to the core concept of "survival by quality", and are committed to providing customers with high-quality electronic components. At the same time, we take specialized R & D manufacturing as the goal, market-oriented development strategy to ensure that our products are always in the forefront of the industry.
With excellent product quality, professional technical service and good market reputation, Kunshan Autofits Technology Co.,Ltd. has won the trust and support of our customers. We look forward to working with more partners hand in hand, to achieve long-term win-win relationship, and jointly promote the prosperity of the electronic components industry.
Where is your company located?
We are located next to Shanghai, the largest city in China, and Kunshan, the first economic county in China. With convenient transportation and developed logistics, it provides a good geographical advantage for our electronic components sales business.
What types of electronic components does your company mainly sell?
We are committed to providing many types and brands of electronic components, including but not limited to Sensors, Switches & Relays, Connectors, Circuit Protectio, Power Supplier & Cable, etc. We have established relationships with many well-known electronic component manufacturers. We have established long-term and stable relationships with many well-known electronic component manufacturers to ensure that the products we sell are of reliable quality and reasonable price.
What are the prices of your products?
Our product prices vary according to market conditions and product models. We are committed to providing high quality electronic components at fair and reasonable prices, and offer our customers a variety of incentives and flexible purchasing methods.
How to purchase your electronic components?
You can contact our customer service staff directly by phone, whatsapp, email, our official website. We support a variety of payment methods, and provide you with fast and safe logistics and distribution services.
How do you guarantee the quality of your products?
We attach great importance to product quality, all the electronic components we sell come from regular channels and undergo strict quality testing. We promise to provide customers with high-quality electronic components, and provide perfect after-sales service to ensure that customers have no worries in the process of use.
If I am not satisfied with the electronic components I purchased, can I return them?
We provide perfect after-sales service, if you are not satisfied with the purchased electronic components, you can return or exchange them within the specified time. Please refer to our official website or consult our customer service staff for the specific return policy and process.
Can your company provide technical support and solutions?
We have a professional technical team that can provide technical support and solutions for our customers. Whether you encounter any problems in choosing or using the products, we will be happy to answer your questions and provide professional technical support.
How to contact your customer service?
You can contact our customer service personnel through the online customer service system on our official website, telephone, e-mail or social media platforms. Our customer service staff will provide you with professional services and answer any questions you may have.
Does your company often organize promotional activities?
In order to give back to our customers, we will organize various promotions from time to time, including discounts, full reductions, giveaways and so on. Please keep an eye on our official website or social media platforms to stay up-to-date with the latest promotions.
