New Original KEYENCE LR-TB2000CL Laser Distance Sensor
"*" indicates required fields
New Original KEYENCE LR-TB2000CL Laser Distance Sensor
Product Overview
This KEYENCE LR-TB2000CL is a laser distance photoelectric sensor from the LR-T series with M12 connector cable design and a detection range of 60 mm to 2000 mm. It uses a 660 nm Class 1 red laser and adopts the triangulation principle to detect targets stably regardless of color difference and surface finish of workpieces. It features compact housing and easy parameter setting via onboard buttons, and it is widely used for object presence checking, distance monitoring and height judgment in packaging, logistics and automated assembly lines.
Main Functions
This sensor emits laser beam to the target surface and calculates distance then outputs switching signal to PLC. It supports NPN or PNP open collector output and users can select normally open or normally closed mode as required. Multiple response time options and built-in timer functions including on delay, off delay and one-shot help filter transient signal fluctuations. It has mutual interference prevention function for side-by-side installation of up to four sensors, and the LED indicators clearly show stable detection status for quick on-site debugging. Built-in reverse polarity and short-circuit protection protects the sensor from wiring mistakes.
Technical Characteristics
This sensor runs on 20 to 30 V DC power supply with current consumption below 45 mA without load. Its operating temperature ranges from minus 20 degrees Celsius to plus 55 degrees Celsius under non-condensing conditions and the protection grade reaches IP65 and IP67. The laser spot diameter is approximately 4 mm, and the response time can be selected among 2 ms, 20 ms, 50 ms, 200 ms and 2000 ms. It can resist ambient light up to 100000 lux and passes vibration and shock tests for normal factory workshop operation. It complies with IEC60825-1 laser safety standard.
Physical Specification
| Item | Parameter |
|---|---|
| Model | LR-TB2000CL |
| Order number | LR-TB2000CL |
| Detection range | 60 mm to 2000 mm |
| Light source | Red laser 660 nm, Class 1 |
| Output type | NPN / PNP selectable, NO / NC selectable |
| Connector | M12 connector type |
| Protection class | IP65 / IP67 |
| Supply voltage | 20 – 30 V DC |
| Feature | Anti-interference, multi-stage response time |
Ten Similar KEYENCE Products with Approximate Function
- KEYENCE LR-TB5000CL laser distance sensor
- KEYENCE LR-TB2000 laser distance sensor
- KEYENCE LR-TB5000 laser distance sensor
- KEYENCE LR-W500 laser sensor
- KEYENCE LR-W70 laser sensor
- KEYENCE LR-TB1000CL laser distance sensor
- KEYENCE LR-TB3000CL laser distance sensor
- KEYENCE LR-ZB100CN laser sensor
- KEYENCE LR-ZB250AN laser sensor
- KEYENCE LR-T series LR-TB020CL laser sensor
About us
